Taroma 3.0 Aromatheraphy Device DIY Kit
Taroma 3.0 Aromatheraphy Device DIY Kit
Taroma 3.0 Aromatheraphy Device DIY Kit
Taroma 3.0 Aromatheraphy Device DIY Kit
Taroma 3.0 Aromatheraphy Device DIY Kit
Taroma 3.0 Aromatheraphy Device DIY Kit
Taroma 3.0 Aromatheraphy Device DIY Kit
Taroma 3.0 Aromatheraphy Device DIY Kit

Taroma 3.0 Aromatheraphy Device DIY Kit

Regular price
$650.00
Sale price
$650.00
Tax included. Shipping calculated at checkout.

Taroma 3.0 is the latest upgrade for our Taroma Series Injectors. Following the unbelievable success of our Taroma Lite Plus series, we've incorporated everything you liked about Taroma Lite Plus, in an enclosed format. No other enclosed model comes close to the sheer performance of Taroma 3.0

Taroma 3.0 uses 300++pcs of 3mm rubies. Begin operation at no more than 535F

Compared to the 2.0, the 3.0 utilizes less mass, lower operating temperatures, more rubies and a more open airflow. The 3.0 also has most of its rubies situated in "Heater Coil Zone"

Taroma 3.0 requires the same amount of Coil Stretch, as a Taroma Lite Plus. Coil needs to be stretched slightly longer than the Gemstone Chamber length, and then pushed back (like a spring) with the cap, for a good and tight fit. 

The built in Gemstone Chamber acts as airflow control, and for better heat retention/recovery due to increased total mass. You can add or mix Aroma Pearls and/or pillars of different colour and sizes, for endless combinations and possibilities. We only offer 3mm Ruby Aroma Pearls at the moment. Taroma is not designed to be used with an empty Gemstone Chamber. Do not attempt to overfill the Gemstone Chamber.


The Taroma housing is designed to fit an industry standard 20mm Heater Coil. These are common heater coils used in household appliances such as coffee machines etc. This is then plugged into the PID Controller. Together with the Qaromashop Adapter Bowl, Aroma Pearls, Stand and Coil Handle, your Taroma DIY Kit is now complete and ready for use.

Do not modify or use incompatible coils on Taroma. For reference, our Coil Pinout is:
Coil (Male 5 pin XLR connector) PIN 1 = TC-, PIN 2 = TC+, PIN 3 = GND, PIN 4 = AC-, PIN 5 = AC+

Note: When resting the heater for a long time, the Taroma Stand will feel like touching a bowl of hot soup. However, it is safe to touch for a few seconds.

Each DIY Kit comes with:
1 x Taroma 3.0 GR2 Titanium Housing

1 x Taroma Glass Adapter - Dimpled Short Bowl with glass screen (14mm or 18mm)

1 x 20mm Test Fitted Taroma Coil

1 x Taroma PID Controller with AU

1 x Taroma Coil Handle - Walnut StabWood Green/Blue (random colour will be chosen)

1 x Taroma Suet Jade Porcelain Stand (random colour will be chosen)

2 x Pack 3mm Aroma Ruby Pearls

1 x Pack 17mm Stainless Steel screens

1 x Free Stainless Steel Scoop + Stirring tool